Traxxas VXL-3S Velineon Brushless Power System Combo (Waterproof)
The next generation of extreme brushless horsepower is here, Ready-To-Race® from Traxxas—and now waterproof! Velineon™ is the ultimate brushless system delivering the tire melting horsepower, supercharged speeds, and ease of use that you expect from Traxxas. Just plug it in and it works. The key to the Velineon’s extreme power output is total system optimization. Each component, from the Traxxas high-current battery connector, to the powerful Velineon 3500 brushless motor, is carefully engineered to work with other system components to...
Tekin 12awg Silicon Power Wire (Red) (3')
This is a three foot length of Tekin 12awg Red Silicon Power Wire.
ProTek RC Braided Brushless Motor Sensor Cable (200mm)
This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness. The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a...
ProTek RC 2S Charge/Balance Adapter (T-Style Ultra Plug to 5mm Bullet Connector)
This is a ProTek R/C 2S Charge/Balance Adapter with a genuine female Ultra Plug™ and is intended for use with 2S LiPo batteries that have 5mm output sockets. This adapter cable will allow you to balance charge your 5mm socket equipped batteries easily, eliminating the need to build your own cable.
Yeah Racing 30x30x10mm Aluminum "Tornado Plus" High Speed Cooling Fan
This is the Yeah Racing 30x30x10mm Aluminum "Tornado Plus" High Speed Cooling Fan. This fan features a full aluminum case to help dissipate heat in hot conditions. Plus, the aluminum case helps to improve durability as well. dual ball bearings and is great for motors, ESC's and multiple other applications. The case has a small relief in the side to allow the fan case to sit flush, and the board is exposed to allow easy re-wiring. Plus, this fan is...
Tekin RX8 GEN3 1/8 Competition Brushless ESC
Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC, Data Logging Capabilities, Timing Profiles, Voltage Cutoffs for LiPos, HotWire 3.0 Bluetooth Connectivity and more. Utilizing Tekin's D2 Dual Drive Mode Technology, the RX8 runs both Sensored and Sensorless motor drives seamlessly, giving you the best of both worlds. The small footprint makes...
Racers Edge Ultra 120 Touch AC/DC LiPo/NiMH Battery Charger (8S/12A/120W x2)
Racer's Edge Ultra 120 Touch is a fully featured, AC/DC touch-screen charger that serves the needs of racers and pilots alike. The screen and user interface is optimized for convenience and ease of use with a fingertip or included stylus pen. A new 16-bit CPU has been developed to safely and accurately charge LiPo, LiFe, Li-Ion, LiHV, Ni-Cd, NiMH and Pb batteries at a maximum rate of 12A, with automatic protection against reverse polarity input or output. A convenient 5V...
Hobbywing Xerun 2510SH-5V ESC Cooling Fan
This is a replacement Hobbywing Xerun 2510SH-5V ESC Cooling Fan. This fan is intended for use with the Justock, Xstock and Quicrun 10BL60 Sensored. This fan includes a ZH-2Y male connector and a 30mm lead. Features: 5V/14000RPM/ Max 7.2V Copper bush/non-waterproof plug:ZH-2Y male, wire length=30mm Specifications: Size: 25x25x10mm Input: 4-5 cell NiMH/NiCd or 2S LiPo Suitable ESC: EZRun 60A, Justock, Xtreme Stock, Quicrun
Dynamite Charge Adapter Banana to EC3 Device DYNC0072
This is the Dynamite Charge Adapter Banana to EC3 Device.
Deans Female Ultra Plug (4)
This is a pack of four Deans Female Ultra Plug polarized connectors. These plugs are designed for maximum current draw applications and provide an excellent connection for high performance battery pack connections in cars and planes. These are used reguarly by racers for race battery pack connectors, charger connectors, receiver pack connectors and for starter box battery connectors.
Racers Edge EC3 to Traxxas Male Adapter RCE1606
Battery/ESC Adapter: EC3 Battery to Male TRX HC Tired of cutting wires and soldering connectors? This convenient adapter from Racer's Edge allows you to connect a battery with a TRX connector to an ESC equipped with an EC3 plug.
RACERS EDGE - 6" UNIVERSAL SERVO Y-HARNESS 22AWG
Racers Edge 6" Universal Servo Y-Harness 22AWG RCE1647
ProTek RC Heavy Duty T-Style Ultra Plug Charge Lead (Male to 4mm Banana)
This is the ProTek R/C Heavy Duty T-Style Charge Lead, featuring a T-style ultra plug on one end connected to 4mm banana plugs with high quality 14awg silicone wire. This charge lead can be used for heavy duty charging due to the 14awg wire, and can be used to charge at rates more than 20 amps. In total length, the lead measures 8.5 inches (21.6cm) long from end to end.
Savox SB-2292SG Black Edition Monster Torque Brushless Steel Gear Servo (High Voltage)
This is the Savox SB-2292SG Black Edition Monster Torque Brushless Steel Gear High Voltage Servo. The Savox Monster Torque servo utilizes a unique brushless motor and controller technology to boost power up to 35% over previous generation servos. Features: Full Aluminum Case 3 Precision Ball Bearings Brushless Motor High Voltage Specifications: Torque: @6V: 305 oz-in (22 kg-cm) @7.4V: 430 oz-in (31 kg-cm) Speed: @6V: 0.085/60° sec @7.4V: 0.07/60° sec Dimensions (L x W x H): 40.3x20.2x38.7mm Weight: 79.0g
Savox SC-1256TG Standard Digital "High Torque" Titanium Gear Servo
This is the Savox SC-1256TG Standard Size Coreless Digital High Torque Titanium Gear Servo. The Savox SC-1256TG combines leading edge technology with super high 12 bit (4096) resolution and Titanium Gears. The SC-1256TG is ideal for steering applications in 1/8 scale buggies, monster trucks and rock crawlers. Features: Light weight Coreless Motor provides high speed, incredible efficiency, and low power consumption Super strong titanium gears The Aluminum Case design not only looks good but also allows for lower operating temperatures. Totally...
Tekin Redline T8 GEN2 1/8th Scale Buggy Competition Brushless Motor (2050kV)
This is the Tekin Redline T8 GEN2 4030 2050kV 1/8th Scale Buggy Competition Brushless Motor. Tekin’s Redline T8 GEN2 motor defines large scale high performance racing. Featuring sensors for flawless, reliable on track operation, the T8 GEN2 provides pro level controlability and power. Capable of both sensored and sensorless operation, the T8 GEN2 motors are the leading edge of large scale RC motor technology. Utilize the torque and speed of your T8 to propel you across the finish line. Couple...
ProTek RC "Glitch Buster" Receiver Voltage Stabiliz
The ProTek R/C Receiver Voltage Stabilizer is a small but powerful super-capacitor that stores and releases power to ensure receiver voltage is always stable. While a BEC regulates voltage to the receiver, it can't perform properly without enough available power. Sometimes a servo or high-power brushless system can draw large pulses of current making the voltage drop and unstable; the result can be glitching, sporadic servo, transponder or gyro performance. To combat this, the ProTek R/C Receiver Voltage Stabilizer stores and reserves extra...
Hobbico Hot-Shot 2 Glow Igniter
This is a Hot-Shot #2 Standard Glo-Starter with Battery Charger from Hobbico. This is used to heat glow plugs to start glow-powered engines. FEATURES: Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model. Pre-Installed battery with included AC battery charger with hex-shaped charge end recharges the glow starter in 10 hours. A red LED glows as unit is charging. Removable red rubber socket cap prevents shorting and any dirt or...
Racers Edge Glitch Buster Power Capacitor
Plug this cap into an open channel in your receiver in order to quiet any glitching caused by interference.
Dynamite Gold Bullet Connector Set, 3.5mm (10)
Heat Shrink not included
Hitec 400W AC/DC Balance Charger/Discharger
Hitec continues to bring you exemplary power and convenience with our latest Power Peak D7 AC/DC Charging Station. Armed with two independent 200-watt output ports, producing up to 20 amps of charge current each, the PowerPeak D7 is capable of charging all battery chemistries quickly and efficiently. The D7 also features mini USB sockets, allowing you to monitor battery health using the latest Logview Software, and stay current with convenient software updates. The 5V/1A USB charge socket provides compatibility with...
TrakPower TK955 Digital Soldering Station
This is the TrakPower TK955 Digital Soldering Station. For any electric modeling application, the high-quality TrakPower TK955 Digital Soldering Station delivers superior results with easy - and exceptionally precise - operation. Features: Digital LED display shows selected temperature, heating status and operational alerts. Simple push-button controls adjust heat in precise 1° increments. Security key locks in selected temperature, preventing accidental changes. Holds selected temperature within 1.8°F (1°C) while idle. Includes chisel and pencil soldering tips Specifications: Power: 60W Temperature: 392-896° F (200-480° C) Dimensions: 4.7 x...
Dynamite EC3 Device Connector (2) (DYNC0007)
EC3 Device Connector (2) (DYNC0007)
Traxxas Velineon ESC Cooling Fan
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling. Compatibility: TRAXXAS BANDIT TRAXXAS RALLY TRAXXAS RUSTLER 4X4 TRAXXAS SLASH TRAXXAS SLASH 4X4 TRAXXAS SLASH 4X4 ULTIMATE TRAXXAS STAMPEDE 4X4 ...
Tekin Hotwire 3.0 Bluetooth USB Interface
Unlock the full potential of your Speed Control with the HotWire 3.0 unit. Connect to Android or IOS devices using Bluetooth wireless technology without touching your car, or Windows computers and Android devices using the USB connection. The HotWire provides access to additional tools such as Data Logging, Adjustable BEC settings plus many more in-depth tuning options to fine tune the performance characteristics of your Speed Control. The HotWire also lets you create and share tweaks and entire track/condition specific...
Hobbywing Xerun 2510SH-5V/0.16A Cooling Fan
This is a replacement Hobbywing Xerun 2510SH-5V/0.16A Cooling Fan. This fan is intended for use with the Xerun 120A V2.1 and Xerun 90A V2.1 ESC's. This fan includes a JR-2P male connector on a 45mm long lead. Features: 5V/13000RPM/ Max 7.2V Copper bush/non-waterproof plug:JR-2P male, wire length=45mm Specifications: Size: 25x25x10mm Input: 4-5 cell NiMH/NiCd or 2S LiPo Suitable ESC: Xerun 120A V2.1 or Xerun 90A V2.1
Dynamite EC2 Device Connector (2)
This is a pack of two Dynamite DC2 Device Connectors. Package includes two connectors and four bullet connectors. Requires soldering.
Hobbywing Xerun XR8 Plus Brushless ESC/G2 Motor Combo (1900kV)
The Hobbywing Xerun XR8 Plus Brushless ESC/Motor Combo includes the awesome 4268SD G2 - 1900kV sensored motor to deliver unmatched power, performance and reliability for demanding 1/8 scale racing applications. Built with high quality components and loaded with cutting edge firmware, the XR8 Plus is responsive enough to protect itself from damage due to abuse, overuse, or even human error. With it's incredible power output and adjustable parameters, the XR8 Plus will deliver the smooth throttle response and linear throttle/brake...
Traxxas High Torque Waterproof Servo
This is a replacement Traxxas High Torque Waterproof Servo. Features: 80 oz-in torque Transit time 0.23 sec/60° TRAXXAS BLAST TRAXXAS E-MAXX TRAXXAS NITRO SLASH TRAXXAS RUSTLER TRAXXAS SPARTAN TRAXXAS STAMPEDE TRAXXAS VILAIN EX
Savox SW-0230MG Waterproof Metal Gear Digital Servo (High Voltage)
This is the Savox SW-0230MG Waterproof Metal Gear Digital Servo. The SW-0230MG is a budget friendly waterproof digital servo capable of operating at 6.0V and 7.4V. This brushed servo features a quick speed of .13 and 111.1 oz-in of torque @ 7.4V. It combines leading edge technology with super high 12-bit (4096) resolution and metal gears for greater precision when dodging puddles. This is a great upgrade if your looking to drive your RC vehicle in any condition, including rain,...
Hobbywing Xerun V10 G2 Competition Modified Brushless Motor (8.5T)
This is the Xerun V10 G2 8.5 Turn Modified Brushless Motor, recommended for 1/10 4WD off-road buggy use. Xerun V10 G2 Motors Specifically designed for extreme running in top 1/10 and 1/12 scale competition racing, the V10 G2 series motors and are compliant with ROAR, IFMAR, BRCA and JMRCA rules. They featuring the perfect combination of high quality materials, exquisite craftsmanship and cutting edge technology, the V10 G2 series provide the extra advantage all professional racers are looking for with...
Hobbywing EZRun MAX10 Sensorless Brushless ESC
The Hobbywing EZRun MAX10 Sensorless Brushless ESC uses an advanced Motor Thermal Protection circuit to monitor the motor temperature and protect the motor from irreversible damage due to overheating. Combined this with a high voltage internal BEC, a high quality power switch and the durability that has made Hobbywing famous and you have an excellent choice for powering your vehicle in any sensorless application. Features: Capacitor Thermal Protection: The capacitor thermal protection first implemented in the MAX10 will effectively protect capacitors from...
Hobby Wing 4 Capacitors Module For Xerun Series Car Esc
Hobbywing's Xerun XR8 Plus was developed to deliver unmatched power, performance and reliability for demanding 1/8 scale racing applications. Built with high quality components and loaded with cutting edge firmware, the XR8 Plus is responsive enough to protect itself from damage due to abuse, overuse, or even human error. With it's incredible power output and adjustable parameters, the XR8 Plus will deliver the smooth throttle response and linear throttle/brake qualities that discriminating drivers demand. Features: Built In High Voltage BEC: The...
Hobbywing Xerun 4274SD G2 Sensored Brushless Motor (2250kV)
This is the Hobbywing 4274SD G2 Sensored Brushless Motor from Hobbywing, suited for us with most 1/8 Off-Road Buggy and Truggy options. Full-Sensored Mode The first motor (in the world) with a built-in chip which helps the ESC identify it's a Hobbywing motor (when pairing with XERUN XR8/XR8 Plus) and form a power system which can work in the "Full-Sensored" mode to provide users with improved performance and smoother control. Note: this motor is also applicable to other ESCs, but it cannot work...
Dynamite Charge Adapter Tamiya Female to Deans Male DYNC0055
This is the Charge Adapter:TAM Female to Deans Compatible Male by Dynamite
Dynamite Flexible Sensor Wire, 175mm
Dynamite Waterproof Flexible Sensor Wire (175mm)
Tekin 12awg Silicon Power Wire White (3')
This is a three foot length of Tekin 12awg White Silicon Power Wire.