Controllers & Receivers
Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver (EP Only) **
The Futaba R304SB-E T-FHSS 4-Channel Telemetry 2.4GHz Receiver is only compatible with Futaba T-FHSS telemetry compatible transmitters. The R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price. However, the two receivers differ in two fundamental areas: this R304SB-E is only intended for electric vehicles and features the benefit of having a non-exposed built-in antenna. The R304SB is compatible with electric/nitro/gas applications...
Futaba R304SB T-FHSS 4-Channel Telemetry Enabled 2.4GHz Receiver **
The Futaba R304SB 2.4GHz T-FHSS 4-Channel Telemetry Enabled Receiver is only compatible with Futaba T-FHSS telemetry compatible transmitters. NOTE: This receiver is NOT compatible with 2.4GHz FASST, FASSTest, FHSS or S-FHSS non telemetry systems. Specifications: Power Requirement: 4.8 - 7.4V battery (dry cells cannot be used) Receiving Frequency: 2.4GHz System: T-FHSS (auto detection) with SBUS2 port Dimensions: 1.38 x 0.91 x 0.33" (35.1 x 23.2 x 8.5mm) Weight: 0.23oz (6.5g) Antenna Length: 7-1/2" Modes: Normal Mode/Analog Servos and High Speed Mode/Digital Servos Number of Ports: 5 PWM Output: 4 SBUS Ports: 0 SBUS2 Ports: 1 FASST: No Telemetry: Yes (T-FHSS) S-FHSS: No High Speed: Yes High Voltage: Yes Connector: J (STND) Range: Full Range
ProTek RC "Glitch Buster" Receiver Voltage Stabilizer **
The ProTek R/C Receiver Voltage Stabilizer is a small but powerful super-capacitor that stores and releases power to ensure receiver voltage is always stable. While a BEC regulates voltage to the receiver, it can't perform properly without enough available power. Sometimes a servo or high-power brushless system can draw large pulses of current making the voltage drop and unstable; the result can be glitching, sporadic servo, transponder or gyro performance. To combat this, the ProTek R/C Receiver Voltage Stabilizer stores and reserves extra...
Futaba 4PM 4-Channel 2.4GHz T-FHSS Radio System w/R304SB Receiver **
Futaba 4PM 2.4GHz 4-Channel T-FHSS Radio System with R304SB Receiver. Features: T-FHSS SR (SUPER RESPONSE) AND TELEMETRY T-FHSS: In addition to the T-FHSS telemetry system, we added a T-FHSS SR (Super Response) system that increased processing speed to further improve response. SR system does not support telemetry function. *R304SB and R304SB-E are not compatible with SR system. T-FHSS MINIZ SYSTEM: By changing to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42....
Racers Edge Glitch Buster Power Capacitor **
Plug this cap into an open channel in your receiver in order to quiet any glitching caused by interference.
Traxxas TQi 2.4GHz 5-Channel Micro Receiver w/Telemetry **
This is a replacement Traxxas TQi 2.4GHz 5-Channel Micro Receiver with Telemetry, and is intended for use with the Traxxas TQi radio system. Compatibility: Traxxas Rally Traxxas Slash 4x4 Ultimate Traxxas XO-1
Traxxas Micro 3-Channel Receiver **
This is a Traxxas 2.4GHz Micro 3-Channel Receiver. This receiver can be used with all third generation TQ 2.4GHz Traxxas transmitters and all TQi transmitters, but does not support the TQi telemetry or model memory capabilities. Compatibility: Traxxas 1/16 E-Revo Traxxas 1/16 Grave Digger Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler Traxxas Stampede
Traxxas Complete BEC Kit w/Receiver Box Cover **
Traxxas Complete BEC Kit. This is the complete BEC system with receiver box cover and seals. Includes: Battery eliminator circuit (BEC) Receiver box cover Bind plug Wire clamp O-ring (3) Foam pads Y-harness (2) 2.5x8mm CS Silicone grease (1) Zip tie Compatibility: Traxxas Rustler 4x4 Traxxas TRX-4
Spektrum RC DX5 Rugged 5-Channel DSMR Surface Radio (Green) (Transmitter Only) **
The Spektrum DX5 Rugged Green edition features an upgraded panel from the previous model, offering an improved feel, control, and system operation. The DX5 Rugged redefines transmitter control with a level of durability to match the tough conditions off-roaders, bashers and boaters encounter constantly. Starting with a chassis based on the superb Spektrum ergonomic design found on the popular DX5C and competition favorite DX5 Pro. By integrating cordless power tool protection features, the DX5 can endure similar punishment. The result...
Losi Antenna Caps **
These are replacement Losi antenna caps. Each pack contains eight caps and slides over the top of your antenna tube to protect your antenna wire and hold it in place. Compatibility: Losi 22 3.0 Losi 22 3.0 SPEC-Racer Losi 22 4.0 Losi 22 4.0 SPEC-Racer Losi 22SCT 3.0 Losi 22T 4.0 Losi 8IGHT Losi 8IGHT 2.0 Losi 8IGHT 3.0 Losi 8IGHT 4.0 Losi 8IGHT Nitro RTR Losi 8IGHT RTR Losi 8IGHT-E Losi 8IGHT-E 3.0 Losi 8IGHT-E 4.0 Losi 8IGHT-E RTR...
Call For Special Order JConcepts Futaba 4PX Radio Bag
The JConcepts Futaba 4PKX Radio Bag offers cushion, ease of use and protection. The lightweight design features a rugged outer bag which has a convenient and easy access zipper closure and inside has a Velcro closure pouch for easy access of additional items. Inside, a high-density, form fitted foam, pre-cut for your 4PKX cushions all sides of your expensive transmitter, while a lower stage foam insert cushions the bottom. The bag is travel friendly and sized to fit inside most...
Tactic Adjustable Neck Strap (Black) **
This is the Transmitter Neck Strap from Tactic. Will work with any 2-stick airplane transmitter with a neck strap hook.
Futaba Orange Tx Neck Strap **
This is the Futaba Orange Neck Strap. COMMENTS: This is the Neck Strap that is included with the 14MZ and 12Z
Dubro Antenna Caps w/Silicone (2) **
This is a pack of two antenna tube caps from Du-Bro
Traxxas TQ 2.4 Transmitter Battery Door (for TRA6516 & TRA6517) **
This Traxxas TQ 2.4 Transmitter Battery Door is a replacement for TRA6516 and TRA6517.
Spektrum RC SPM Neck Strap
Spektrum RC SPM Neck Strap
Hitec Standard Receiver Switch Harness with Charging Connector **
This is a standard receiver switch harness from Hitec, with integrated charging connector. This version has JR style connectors on it, so it will work with any brand of battery pack and with any brand of receiver. This switch harness has an integrated charging lead, so you can charge your receiver pack without having to remove it from your car.