IN Store Pickup Available
Select In Store Pick up at Checkout
Traxxas Parallel Battery Wire Harness (Traxxas ID)
Traxxas Parallel Battery Wire Harness. Use the parallel harness to combine battery capacity and get extra long runtimes of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/4000mAh)
|Type||Total Capacity||Voltage||C Rating||Length||Height||Width||Weight|
|LiPo||4000 mAh||11.1 V||25||135 mm||26 mm||43 mm||11.1 oz|
Traxxas Series Battery Wire Harness (NiMH Only).
Traxxas Series Battery Wire Harness. Use the series harness to combine battery voltage and unlock the 50+mph speed potential of your model. Dual-battery operation requires attention to precautions outlined in the model's owners manual. Follow all precautions to assure peak performance and reliability of your model and batteries. Traxxas parallel and series Y-harnesses are for use with 2/3A battery packs only.
Traxxas Connector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, wiring harness (EZ-Start and EZ-Start 2)
Traxxas Y-HARNESS BEC
Traxxas CONNECTOR, POWER TAP W/ CABLE^
Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
Traxxas 12-Volt Adapter (Female to Alligator Clips) *Discontinued
Traxxas RPM Telemetry Sensor (Short)
This is an optional Traxxas "short" RPM Sensor. To collect critical RPM data (Revolutions Per Minute), a "trigger magnet" is installed in the spur gear of electric models, or the flywheel of nitro vehicles. To offset the weight of the magnet, additional material is molded or cast into the opposite side of the spur gear or flywheel. To read the magnet, a hall effect sensor is installed in the gear cover (electric models) or installed on a support arm (nitro models). Each time the trigger magnet passes the RPM sensor, a revolution is counted. Revolutions per minute are displayed on the tachometer of the Traxxas Link dashboard. RPM is also the key to determining your model's speed. When you select your model in the Traxxas Link application, the app uses your model's transmission ratio and tire circumference to calculate its speed based on RPM, and the speed is displayed on the Traxxas Link App's dashboard speedometer.
NOTE: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with the Traxxas Link App installed.
Traxxas Temperature & Voltage Telemetry Sensor (Short)
This is an optional Traxxas "Short" Temperature & Voltage Sensor. Temperature data is critical to monitoring performance, gauging the effects of changes, and preventing overheating. The Temperature Sensor features a precision thermistor and is installed on the motor or engine to continually monitor temperature as you drive. The Temperature Sensor can also be fitted to a speed control, battery, or exhaust pipe to monitor its temperature.
Traxxas RPM Telemetry Sensor (Long)
Sensor, RPM (long)/ 3x4mm BCS (2)/ 3x4 GS (1)
Traxxas iD LiPo Battery Balance Lead Adapter **
The Traxxas iD LiPo Battery Balance Lead Adapter allows customers to connect their Traxxas iD batteries to accessory cell voltage checkers without using the EZ-Peak Live app with EZ-Peak Live chargers. The adapter is compatible with 2s, 3s, and 4s Traxxas iD LiPo batteries.
NOTE: Do not attempt to use the #2938X adapter for charging or any purpose other than adapting Traxxas iD batteries to accessory cell voltage checkers.