Connectors

This solder is not only great for hobby projects but good all electrical applications. The melting temperature for this solder is 374 degrees Fahrenheit.

Key Features:

• Designed For Electrical & Electronic Work
• 60% Tin, 40% Lead
• .031 Diameter
• Melts at 374° F
• 4oz Spool

Dynamite EC5 Battery Connectors (2) DYNC0022

5mm Male Bullets Low Profile (pr.) Gold 19mm

This a XT60 Female to EC5 Male charging adapter with 12AWG wire.   This can be used on the HOTA D6 and D6 Pro and other chargers that use a XT60 male connector like the iCharger X6.

This is a set of six Castle Creations 6.5mm Bullet Connectors.  The package contains 3 male and 3 female connectors. 

If you want something done right, you usually have to do it yourself. Castle Creations was never totally satisfied with the options for bullet connectors for high power applications, so they designed and manufactured their own. Castle Creations Bullets make a perfect connection, every time. Simple as that. Available in a lovely shade of gold and made in three sizes: 4mm, 5.5mm, and 6.5mm. 

This is a Dynamite EC5 Device Charge Lead. This charge lead features two 4mm banana style bullets fixed to 10awg wire.

Compatibility:

• Pro Boat Veles 29

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness. 

The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. Choose from between 90mm and 300mm lengths.

This is a ProTek R/C Braided Brushless Motor Sensor Cable. This sensor cable is intended for use with any sensor-based brushless system that uses a replaceable sensor wire harness. 

The ProTek R/C sensor cable features flexible silicone wire shielding on each of the six sensor wires, with a black braided nylon protective sheath surrounding the sensor wires. Additionally, the braided sheath is shrink wrapped at each end providing complete protection to the cable. This protection and flexibility leads to a free moving and shock absorbing sensor cable while ensuring smooth, consistent and reliable data transfer between your ESC and motor. Choose from between 90mm and 300mm lengths.

Our main charge leads are constructed from the highest quality materials to ensure that you get the best connection possible every time you charge your batteries.

Directly connect to your batteries with Traxxas connectors, and to your charger with 4mm banana plugs. 12" of heavy-duty 12 AWG silicone wire gives you the flexibility to work in any charging setup.

This is a pack of two pairs of T-style ultra plugs from ProTek R/C. There are total of two female and two male connectors in the package, along with one piece of heat shrink tubing.

These connectors are designed to easily handle in excess of 50A of continuous current.

Manufacturer Description

2S-6S XH Balance Board

Ultra Power single-channel chargers include one balance board, whereas multi-channel chargers include two. Consumers that utilize three or four output ports will require additional boards if they're charging lithium packs.

This is a heavy duty 2S hard case lithium polymer battery charge/balance adapter lead from ProTek R/C. This 13" long charge lead allows you to plug a 2S battery with 5mm female bullet connectors directly to your charger, eliminating the need for a balance board!

This adapter lead features 4mm banana plugs on the charger end, and 5mm banana plugs on the battery end, connected with 14awg wire. The balance wires include a 2mm banana plug on the battery end, with a 7-pin XH plug connected with 22awg wire for balancing that is plugged directly into the 6S balance port in the charger. This charge lead is specifically designed to connect a ProTek R/C 2S LiPo hard pack with 5mm connectors to ProTek R/C chargers, but will also work with any charger that uses 4mm bullet connectors for output, and has a 7-pin (6S) XH balance port.