Pacer Technology Zap-O Odorless Foam Safe CA Glue (0.7oz)
Key Features Odorless "no more tears" formula Safe for all hobby foams Medium thick, cures in 15 seconds 20-gram bottle Needed To Complete To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PAAPT28). Overview Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood and most other modeling and hobby materials. Zap-O Foam Safe CA is also great for craft work when gluing foam shapes or various materials to foam products. Medium thick formula that cures in 15 seconds. Packaged in a 20-gram bottle. To cure properly, Zap-O Foam Safe CA must be used with Zap Foam Safe Kicker (PAAPT28).
Works best on: Carbon Fiber Cell Foam Ceramics EPS Foam Foam Board Polystyrene Wood XPS Foam
Pacer Technology Zap A-Dap-A Goo II Adhesive (1oz)
Key Features All-Purpose Adhesive and Sealant Bonds virtually everything Dries clear Remains flexible Works where others wont
ZAP GOO bonds wood to fiberglass, metal to wood, plastic to metal, just about anything to anything with a strong flexible bond. ZAP GOO is an excellent adhesive for today's high tech composite airplane, boat, and car hobby products, and great for all of those fix-it, mend-it, seal-it, and stick-it jobs around the house.The excellent shock resistant flexible bond means your parts will stay put even when subject to high vibration and extreme shocks.ZAP GOO and its ability it stick various materials together makes it great for craft work including wood, clay, plaster, glass, and fabrics.
ZAP GOO takes 24 to 36 hours to full cure and reach maximum strength. All parts to be glued should be clean and dry.Apply GOO to both parts, let dry for 1 to 2 minutes then assemble.Clamp or set aside to dry, do not disturb the bonded joint until dry.When applying GOO, a slight hesitation in pulling the tube away from the glue will prevent stringing. For disassembly, ZAP GOO bonds can be cut with a razor knife.
Specs Adhesive Type Shoe Goo Application Type Tube Size 1 Ounce Viscosity Gel
Best accelerator for ZAP and all other super glues
Expands gap filling capacity
Solves most tough to bond material combinations
ZIP KICKER is the best way to accelerate the cure time of all brands of super glues. When sprayed directly on a glued joint it forces the immediate cure of the CA glue. Thick or slow style glues form an instant hard outer shell when sprayed with ZIP KICKER, the catalytic action begins curing the remaining liquid CA at an accelerated rate from the outside in, creating a strong bond. This action allows the creation of small to very large fillets and the ability to fill large gaps or cracks. Wood turners love this ability and often are able to progressively fill in large cracks and save the piece they are working on. ZIP KICKER will not harm most materials making perfect to use not only on wood but various plastics, metals, paints, and fabrics.
A little goes a long way! Because ZIP KICKER cures CA glue by a chemical reaction, you can precisely control how fast the glue sets up. Use a small amount to start the reaction at one spot and it will continue until the glue is set. The more ZIP KICKER you apply to the glue, the faster it will cure. Once the entire surface of the glue has been sprayed with kicker and the reaction has started, adding more kicker will not speed up the cure rate. In hard to reach areas or when trying to join parts that are not porous you can pre-treat one of the parts to be joined with ZIP KICKER, apply ZAP GLUE to the other and join the two together. When working with balsa wood spraying ZIP KICKER on the back side of thin sheeting can set the CA underneath. Even a part treated with ZIP KICKER and allowed to dry will speed the cure time of any CA that comes in contact with it. DO NOT SPRAY ZIP KICKER AROUND YOUR BOTTLES OF CA, A SMALL AMOUNT OF KICKER ON THE OPENING OF YOUR CA BOTTLE CAN AND WILL SET OFF AND HARDEN THE ENTIRE BOTTLE. Although ZIP KICKER will work on most materials and paints, always test on samples for compatibility. For critical applications test sample joints for the designed strength requirements.